General specifications
MODELS E-60  E-72  E-86
Cutting width
Cutting height 
Recom. H. power
Impeller RPM
Impeller diameter 
Impeller shaft dia.  
Impeller depth
Number of blade
Main auger diameter
Drive chain number
Number of safety bold
Bearing-Ductile I.C.
Cylinder size
Length closed
Impeller center height
Balanced impeller
Balanced auger
Carbon steel blade
Chute rotation manual
Chute rotation hyd. cyl.
P.T.O. shaft number 
Hitch category  
Weight (lb) approx.

60" 
26" 
16 - 25 
540
20" 
1"
7" 
4 
17" 
50
2
Std.
2" x 4"
14¼" 
13½"
Std.
Std. 
Std.
Opt. 
Opt.
2  
1
470 lbs

72"
27½"
25 - 40 
540 
22"
1¼"
8"  
4 
17"
60 
2
Std.
2" x 4"
14¼" 
14½"
Std.
Std. 
Std.
Opt. 
Opt.
4
1
540 lbs

86"
33½"
40 - 75
540
26"
1 9/16"
11"
4
20"
60
2
Std.
2" x 4"
14¼" 
17¼"
Std.
Std. 
Std.
Opt. 
Opt.
6
2
915 lbs

 
  1. Chute rotation with steel cable and cylinder (optional)
  2. Manual chute rotation (optional)
  3. Perforated adjustable deflector by cylinder (optional)
  4. Adjustable deflector by cylinder (optional)
  5. Balanced auger and impeller
  6. High carbon steel cutting blade

   
 

 

  


Features

  • Chute rotation on polyethylene UHMW
  • Rotary drum with UHMW side on each side
  • Removable rotary drum
  • Hydraulic hoses holder
  • Reinforced blade support and sides
  • Reversible and replaceable carbon blade
  • Balance auger and impeller
  • Adjustable carbon steel skid shoes
  • Manual chute rotation 360°
  • Hydraulic cylinder chute rotation 270°
  • Hydraulic motor chute rotation with gear adjustable from 255° to 360°
  • Chute deflector with telescopic rod standard
  • Hydraulic chute deflector
  • Industrial and semi-industrial chute
  • 13" diameter upper auger on models N-92 and N-92TR
  • 17" diameter upper auger on models N-98, N-98TR, N-104, N-104TR
  • Bearing ductile iron casing on all models
  • 21 standard models from 54" to 104"
  • Quality paint with primer

 

The  "pull type" snowblower is made for a special use.

Contractors who care about efficiency and for a rapid clearing prefer this type of equipment.

A rear hydraulic blade made with polyethylene is offered as an option for a better cleaning and for the protection of different kind of pavement.
 

  1. Chute rotation on polyethylene UHM to avoid friction and ice accumulation
  2. Chute rotation with gear and hydraulic motor adjustable from 255° to 360°
  3. Industrial chute with two deflectors
  4. Standard chute
  5. Chute deflector with telescopic rod
  6. 48" extension with quick attach base
  7. Chute rotation with steel cable and cylinder 270°
  8. Hydraulic hoses holder
  9. Adjustable carbon steel skid shoes
  10. Removable rotary drum with two polyethylene UHMW bearings (front and back) for easy maintenance.
Top 
michaudequipment@rogers.com
| Home | Bulk Boxes | Contact us | Harvester | High Pressure Washer | Motors | Planter | Potato Piler |
| Services | Sewing Machine | Snow Blower | Suppliers | Tank | Used | Windrower | Français |