Équipement Michaud Equipment

MODEL 2000 DIGGER WINDROWER

Designed with less drop to reduce bruising.
Optional hook or belted primary chains.
Full width secondary & override deviner chains.

Open design provides excellent visibility into the windrower.

Rear axle provides better weight distribution and improved steering capabilities.

Rear cross conveyor may discharge to either side. Discharge height is controlled from the tractor cab with an electric actuator.

Specifications

Operating Characteristics Productivity in 10 hours U.S. recommended area per machine Operating speed Maximum transport speed Number of rows	10 acres 150 acres 2-5 mph 10 mph 2
Dimensions Operating width (approx.) Length (approx.) * Weight (approx.)	10.2 ft. 24.8 ft. 8,500 lbs.
Operating Requirements Tractor drawbar power Tractor PTO Tractor hydraulic pressure	75h 1000 rpm 1,500 - 3,000 psi
Operating Requirements - Hydraulic Bed Shaker Attachment Hydraulic System Open Center Closed center Oil flow at maximum motor rpm	** Power Source Tractor hydraulics Tractor hydraulics 10 gpm

* Machine weight may vary with optional equipment.
**When connecting auxiliary equipment to the tractor hydraulic system for power source,
consult the tractor manufacturer's specifications to be sure of the type of system
and pump delivery capacity to prevent damage.

MODEL 5000 DIGGER WINDROWER

Lockwood Digger Windrower Features:

Unique "On the Go" rear lift adjustment option
132 ½" or 140" Wide Digger section for better feeding
Excellent visibility of discharge
24" Diamond tread or Optional grader tires
Heavy duty spindles, hubs and rims
Adjustable axle for 34" to 38" rows
All drives are #80 chain
Hydraulic drive rear cross
Heavy duty trailing coulters
Adjustable cast pintle hitch
Hinged shields for easy access
Electric valve bank

Brute Strength for
Years to Come
The digger nose, like to rest of the machine, is built rugged for years of dependable service. It features solid steel cross pipes and one inch thick side boards. Full width digger noses are available to fit row spacings from 32 to 38 inches.

Steerable Rear Axle
Adds Manoeuvrability
Steering is easily controlled from the cab with electro-hydraulics. Turning requires only 14 to 18 feet of headland. The steerable rear axle allows the operator to track straight when harvesting sidehills. Weight is distributed evenly with the wheels at the rear of the machine.
Hydraulic or Manual
Rear Lift
Change the angle of the secondary with the rear lift attachment. Hydraulically or manually raised and lowered the rear lift is sure to help in varied field conditions.

Hydraulic Drive Side Discharge on Rear Cross
An electric hydraulic drive actuator lets the operator control the discharge height from the cab. This keeps the discharge close to the ground at all times to reduce bruise. The operator has a choice of discharging to the right, left or both sides. The hydraulic drive rear cross operates independently with its own on/off switch.

Specifications

Number of rows Row spacing Operating speed Headland to turn Horsepower requirement Hydraulic pressure Weight Operating Width Length	4 rows 34" - 38" 2-5 mph 14-18 feet 130-180 hp 1500-2500 psi 13,200 lbs. 16.5 feet 24.8 feet
Chain Lengths* Primary Secondary Override Rear cross	16.73 feet 11.32 feet & 12.46 feet 20.6 feet 33.46 feet

* Vary slightly depending on pitch

Top

michaudequipment@rogers.com